VR0096ATYAA3DNF10 is a 0.96 inch IPS TFT-LCD display featured with Optical bonding (OCA) capacitive touch screen on module, made of resolution 80x160 pixels. This 0.96 inch Mini TFT LCD Display is portrait mode with IPS (In-Plane Switching) Panel which having the feature of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) and the capacitive touch screen is adopted optical bonding technology which is a silicone Optical Clear Adhesive (OCA) process that fills air gaps between components in LCD displays, that having the advantage of increases the ruggedness of the display and improving durability to having better able to resist scratches, fluids, stains and dirt. This TFT model is built in with FT3267 touch panel IC on module, that supports I2C interface, and one detect point for capacitive touch screen.
This 0.96" TFT WF0096ATYAA3DNF10 module is built-in with ST7735S controller IC, it supports 4-wire SPI interface, supply voltage (VCC) range is from 3.0V to 3.6V, with brightness 400 nits (typical value), contrast ratio 800:1.This module is ideal for wearable devices, medical devices, etc. This module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.
General Specifications
Item
Dimension
Unit
Size
0.96
inch
Dot Matrix
80 × RGB × 160(TFT)
dots
Module dimension
18.7(W) × 31.9(H) × 2.64(D)
mm
Active area
10.8 × 21.696
mm
Dot pitch
0.135 × 0.1356
mm
LCD type
TFT, Normally black, Transmissive
-
Viewing Angle
80/80/80/80(IPS)
-
Aspect Ratio
1:2
-
IC
ST7735S or equivalent
-
TFT Interface
SPI
-
Backlight Type
LED, Normally White
-
PCAP Interface
I2C
-
PCAP IC
FT3267 or equivalent
-
PCAP FW Version
V06
-
Touch Panel
Projected Capacitive Touch Screen
-
Surface
Glare
-
Absolute Maximum Ratings
Item
Symbol
Min
Typ
Max
Unit
Operating Temperature
TOP
-20
－
+70
℃
Storage Temperature
TST
-30
－
+80
℃
Interface Definitions
LCM PIN Definition
Pin
Symbol
Function
1
SPI4W
SPI4W='0' , 3-wire SPI; SPI4W='1' , 4-wire SPI.
2
NC
No connection
3
SDA
Serial interface data
4
SCL
Serial interface clock
5
RS
Data/command selection pin (4-wire SPI use)
6
RES
Reset pin (low active)
7
CS
Chip selection pin (low active)
8
GND
Ground
9
NC
No connection
10
VCC
Power supply
11
LEDK
Back light cathode
12
LEDA
Back light anode
13
GND
Ground
PCAP PIN Definition
Pin
Symbol
Function
1
VDDT
Power supply
2
SCL
IIC clock signal. Must be pulled high
3
SDA
IIC data signal. Must be pulled high.
4
INT
External interrupt to the host
5
RESET
External Reset. Low is active
6
VSS
Power ground.
Reviews
You're reviewing:
VR0096ATYAA3DNF10 0.96" ST7735 80x160 IPS TFT with (OCA) PCAP